Remko RKV 13 C Bedienungsanleitung

REMKO – powerful like a bear. REMKO RKV 13 C / 18 C / 24 C Ceiling Cassettes Edition GB – P05 Operation Technology Spare Parts

10 à If the timer function is activated, the unit checks the room temperature one hour before the programmed start-up time. Based on the start-up time

11 Night shut-down button (17) The night shut-down function is a convenient function that lets the room temperature rise gradually which has health be

12 Reset button (20) If the batteries were replaced (page 5) or if the remote control is not working properly, the indented button (20) must be presse

13 G When using water, the filter must first be com-pletely air dried before it can be reinserted into the unit. 5. Reinsert the filter carefully.

14 * Capacities based on ISO R 859A; room temperature of TK 27°C/FK 19°C - outside temperature 35°C ** Noise measurement DIN 45635

15 G G Before any work on the unit is performed, it must be disconnected from the power supply (fuse or repair switch) and prevented from being inadve

16 Assembly Instructions for Service Personnel Important instructions prior to installation Prior to actual assembly, the following items have to be

17 Installation The indoor unit is attached by means of four threaded rods to be provided by the customer. The supplied card-board stencil makes it e

18 11. Now tighten the bolts using 2 hexagonal wrenches that have a large enough opening. 12. Use a second wrench to apply counterpressure when tighte

19 Condensation Connection Condensation forms on the evaporator during cooling operation because temperatures below the dew point are reached. The co

20 When connecting to RKS: L = A N = N Y = 2 L = External conductor N = Neutral conductor Y = Compressor operation (r

21 Two-Room and Fresh Air Connection The indoor unit is designed to cool a second room and, independently of this, to suction in fresh air. On each s

22 Installing the air direction plate To provide cool fresh air to the room, it is necessary to mount the supplied air direction plate made of plastic

23 Certification for  Initial operation  Subsequent operation of a REMKO air-conditioning unit / system Outdoor part Indoor unit 1

REMKO GmbH & Co. KG Klima- und Wärmetechnik D-32791 Lage • Im Seelenkamp 12 D-32777 Lage • PO Box 1827 Phone +49 (5232) 606 - 0 Fax +

3 Always keep these operating instructions near or on the unit! G G Contents Page Safety Hints

4 Safety Hints Extensive tests have been conducted on the material, functionality and quality of these units before they were shipped. These units ma

5 General information à The unit is programmed using an infrared remote control. It can also be used to switch the unit on and off. à The remote contr

6 The remote control 1 = Signal transmission display 2 = Operating mode display 3 = Temperature display 4 = Fan operation display 5 = Clock

7 Multifunctional display The display is divided into 4 areas. The operating mode is displayed in the upper area. Operating mode display:

8 Optimum cooling mode In “Cooling” mode, the air in the room is suctioned in by the air-conditioning unit, filtered and then returned in a cooled sta

9 Position of the air outlet plate fins The plate fins can be positioned in accordance with the following illustrations. The illustration below shows