Remko MHP-Manager Wireless Remote Control Bedienungsanleitung PDF herunterladen (Seite 11)

User menu

System

This menu contains all the settings which can be adjusted by the user of the system.

Parameter Value range Default OV*) Comments

Language Depends on variant English Set the language for the controller

LCD contrast (-20) - (20) 04 Set the intensity of the display

LCD brightness Off/On On Switch display backlight ON/OFF

LCD status 1 - 5 1

Since the display is the biggest consumer, while it is not

being operated, it switches into a power-saving mode (only

displaying the time and date).

In the interests of saving even more power to increase

battery life, the parameter [LCD Status] will switch off the

display altogether when the controller is in certain states:

1: Display ON

2: Display ON, with heating programme enabled

3: Display ON, if demand exists for heating

4: Display ON/OFF with time interval (10s OFF/ 5s ON)

5: Display OFF

If a control is operated, the display switches back on

automatically.

*) OV = Own values: space to enter you settings for each parameter in the system

Hot water

Parameter Value range Default OV*) Comments

1x hot water Off/On Off

On => The tank is enabled for charging (e.g. for showering

outside hot water time periods).

Charge begins when “Target temperature 1” is fallen below

by the switching hysteresis.

*) for KM1/6/9 and bus code 00/01 only

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Keine Kommentare

Remko MHP-Manager Wireless Remote Control Bedienungsanleitung Seite 11