Remko RKS 435 H Bedienungsanleitung Seite 7

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 6
Fault Possible cause Check Remedy
The unit is not running
or shuts itself down.
Power failure.
Is all electrical equipment
working?
Check voltage and
wait for unit to restart.
Mains fuse defective.
Master switch off.
Are all lighting current circuits
functioning?
Replace mains fuse.
Turn on master switch.
Mains feed damaged.
Is all electrical equipment
working?
Repair by
specialist company.
Waiting time after starting up
too short.
Did the unit restart after
approx. 5 minutes?
Schedule longer waiting time.
Operation above or below
specified temperature range.
Are the fans on the
unit still working?
Observe temperature
range.
Intermittent over
or undervoltage.
Checking by a
specialist company.
Shut down and restart the
system.
Disconnecting contact on exter-
nal condensation pump open.
Is the external condensation
pump for the indoor unit indica-
ting a fault?
Clean the condensation pump
drain.
Have the pump replaced.
The unit is operating
with reduced or no
refrigerating capacity.
Air inlet and/or outlet
opening blocked by
foreign objects.
Foreign objects around air inlet
and outlet?
Clean blades.
Reduce air resistance.
Heating or wind load
increased.
Has there been a change to
the construction or application?
Take appropriate measures
to stop the heating and wind
loads.
No heat discharge possible.
Is the fan on the outdoor unit
working?
Check fan / winter
controller.
Leak in refrigeration circuit.
Is significant frost formation vi-
sible on the large blocking valve?
Repair by
specialist company.
The unit has been manufactured using state of the art production methods and its function has been tested
several times. However, if any malfunctions should occur, check the unit using the list below. In systems with However, if any malfunctions should occur, check the unit using the list below. In systems withHowever, if any malfunctions should occur, check the unit using the list below. In systems with In systems withIn systems with
indoor and outdoor units, you should refer to the “Troubleshooting” and customer service sections in both op-
erating manuals. If all the function checks have been performed and the unit is still not working properly, notify If all the function checks have been performed and the unit is still not working properly, notifyIf all the function checks have been performed and the unit is still not working properly, notify
your local specialist dealer.
Troubleshooting and customer service
Functional fault
7
Seitenansicht 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare