Remko RKS 435 H Bedienungsanleitung PDF herunterladen (Seite 6)

Operation

The outdoor unit is operated by

the controller for the connected

indoor unit.

For this reason, the instructions

in the “Operation” section of the

indoor unit manual must be fol-

lowed.

Short-term shutdown

1. Shut down the system using

the remote control.

2. Disconnect the power supply to

the unit.

3. Inspect the unit for visible dam-

age and clean it as described in

the “Care and maintenance”

section.

4. If possible, cover the unit

with a plastic sheet to protect

it against the effects of the

weather.

Permanent shutdown

The units and components must

be disposed of in line with appli-

cable regional regulations, e.g. by

authorised disposal and recycling

companies or at designated collec-

tion points.

REMKO GmbH & Co. KG or your

contractual partner will be able to

provide you with the name of an

appropriate specialist company in

your area.

Shutting down

Regular care and compliance with

certain basic requirements ensure

fault-free operation of the unit and

long service life.

Care and maintenance

The power supply must be

disconnected and secured

against reconnection before

carrying out any work on the

equipment.

CAUTION

Care



Keep the unit free of soiling,

fouling and other deposits.



Clean the units with a moist

cloth.

Do not use a water jet.



Do not use any cleaners that

are sharp, abrasive or contain

solvents.



Only use appropriate clean-

ing agents, even for extremely

severe soiling.



If necessary, check the level of

soiling of the exchanger ﬁns.

 Cover the unit with a plastic

sheet to prevent dirt from get-

ting into the unit.

Maintenance

 We recommend that you ar-

range a maintenance contract

with annual maintenance inter-

vals with an appropriate special-

ist ﬁrm.

This will ensure reliable opera-

tion of the system at all times!

Type of work

Checks / maintenance / inspection

Initial operation

Monthly

Half yearly

Yearly

General

•

Checking voltage and current

• •

Checking compressor function

• •

Checking fan function

• •

Fin exchanger soiling

• •

Checking refrigerant level

• •

Checking condensation drain

• •

Checking insulation

• •

This will ensure reliable

operation of the system at

all times!

HINT

REMKO RKS

6

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare