Remko ML 260 Bedienungsanleitung

REMKO – powerful like a bear. REMKO ML 260 to 680 Air-conditioning packets Wall units Edition GB – R05 Operation Technology Spare Parts MALAGA series

10 * Before any work on the units is performed, they must be disconnected from the power supply and secured against being inadvertently switched on! M

11 Troubleshooting This unit has been designed based on state-of-the-art manufacturing methods and it has been tested repeatedly to ensure that it is

12 ML 260 ML 350 ML 520 ML 680 Nominal cooling capacity* kW 2.59 3.50 5.27 6.80 Energy efficiency class cooling C C D D Energy efficie

13 Dimensions ML 260 AT ML 260 IT ML 350 AT ML 520 AT 700 440 275 548 280 ML 680 IT 630 325 730 340 860 805 540 305 605 330 645 480 265 543 280 788 2

14 Assembly Instructions for Service Personnel Important instructions prior to installation Ensure that the contents of the package are com-plete

15 Setup locations for the outdoor unit The unit must be set up on a surface that is level, smooth and solid. The unit must also be secured against ti

16 Minimum distances for the indoor units The distances required for smooth operation of the indoor unit are specified in the following figure. Dimen

17 * Only tools approved for use in cold conditions may be used. Pipe cutter, deburrer and flare tool. Deburrer Refrigerant pipe Flare tool uneven thi

18 Oil recirculation If the outdoor unit is set up at a higher level than the in-door unit, appropriate steps must be taken for oil recir-culation. Th

19 Connecting the outdoor unit Prior to installing the connection, observed the follow-ing: The customer must install the con-trol box close to the

20 Proceed as follows to add the additional refrigerant required: 1. Remove the vacuum pump and connect the filling cylinder. 2. Place the open cyli

21 Only authorised service centres may come into contact with the cooling cycle. This ensures that refrigerant does not escape into the environment wh

Certification for Initial Operation Date 01/2005  Initial Operation  Subsequent Operation of a REMKO air-conditioning system  The

REMKO GmbH & Co. KG Air-Conditioning and Heating Technology D-32791 Lage • Im Seelenkamp 12 D-32777 Lage • P.O. Box 1827 Phone: +49 52 32 606 -

3 Always keep these operating instructions near or on the unit! * * Contents Page Safety Instructions 4 Transport and Packaging 4 Description of De

4 Never operate the indoor units without an air filter! Make sure that the outdoor unit is equipped with a safety mechanism which prevents conde

5 Operation Two to four seconds after the indoor unit has been con-nected to the power supply, operation can begin. Inserting the batteries into the

6 Button functionality The following settings can be made using the remote control at a distance of no more than 7m. Point the remote control at the r

7 Automatic mode In automatic mode, the control mechanism operates in cooling mode. A target temperature of 24°C is permanently set. The range lies

8 Fin button The air outlet fins are individually set with this button. You can select 5 positions and an os-cillating function. Functional process Sw

9 Manual operation The unit can be manually operated if, for example, the infrared remote control is not functioning properly or has been lost. Open